给个正规365网站

服务热线: 400-117-8816
           13406879330

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

当前位置:首页>新闻中心>扭矩扳手表盘式的该怎么去使用?

扭矩扳手表盘式的该怎么去使用?

来源:https://www.xjnwz.com 日期:2021-11-10 发布人:admin

一、扭矩扳手在使用前,应根据紧固件的强度等级和扭矩值要求选用合适量程的规格和型号,不应超范围使用。右旋使用时,顺时针旋转表盖上的旋钮,使记忆指针与主动指针指向刻度盘的零位刻线。左旋使用时,逆时针旋转表盖的的旋钮,使记忆指针与主动指针靠紧,且主动指针指向刻度盘的零位刻线。

1、 Before using the torque wrench, the specification and model of appropriate range shall be selected according to the strength grade and torque value requirements of fasteners, and it shall not be used beyond the range. When using right rotation, rotate the knob on the meter cover clockwise to make the memory pointer and active pointer point to the zero mark of the dial. When using left-hand rotation, rotate the knob of the meter cover counterclockwise to make the memory pointer close to the active pointer, and the active pointer points to the zero mark of the dial.
电动扭矩扳手
]二、在使用时,将指针扳手的方榫与紧固件对接(根据需要可直接对接,也可通过转接套筒对接),然后缓慢平稳地施加扳拧力,直至记忆指针指向所需的扭矩值。
]2、 When in use, butt the square tenon of the pointer wrench with the fastener (butt directly or through the adapter sleeve as required), and then slowly and stably apply the pulling force until the memory pointer points to the required torque value.
三、在停止施力后,主动指针在弹性元件和机芯扭簧的作用下自动回复零位,记忆指针仍停留在指示的刻度上,并准确读出扭矩值。旋转表盖上的旋钮,使记忆指针也回复到零位,可进行下一次使用。精量在使用时,还进行定期的检查和校正。
3、 After stopping the force application, the active pointer will automatically return to the zero position under the action of the elastic element and the movement torsion spring, the memory pointer will still stay on the indicated scale and accurately read out the torque value. Rotate the knob on the meter cover to return the memory pointer to the zero position for the next use. When the precision is used, it is also checked and corrected regularly.
以上就是扭矩扳手为大家带来的相关至少分享,感谢您的浏览,如想了解其他产品信息,欢迎登录我们官网进行查看。
The above is the torque wrench Thank you for your browsing. If you want to know other product information, please log in to our official website.